Climbing Pre-Clip Pamo Brush Attachment Chonbo Stick

This is a pre-clipping tool for climbing.
We have uploaded a video demonstrating its use on YouTube.
Please search for プリクリップ棒 3Dプリンタ (pre-clipping stick 3D printer) to watch it.

There are two ways to use it:
① Attaching quickdraws with the rope already clipped in.
Hook the quickdraw onto the tool with the carabiner gate open, then pull downwards diagonally to close the gate.

② Clipping the rope into an already placed quickdraw.
With the rope around the gate, pull one end of the rope to push the gate open and clip it in.
[Tips for Use]
・When lifting, if the weight of the rope is applied, the rope may slip. Therefore, hold the rope (both sides) together with the stick.
・When clipping into the gate, keep holding one side of the rope with the stick, and pull the other end of the rope with your other hand.

This product is designed to attach to the tip of a Pamo brush.
(We also sell a type that attaches to a selfie stick separately.)

Can be used with both wire gate and keylock gate carabiners.
*This product is only the pre-clipping attachment; quickdraws and sticks are not included.

It can be used with gates approximately 11-12mm wide, but we can also create it for other sizes upon request.

As this is a 3D printed product, please understand that minor imperfections like burrs that do not affect functionality are to be expected.

Free climbing, alpine climbing, Petzl, Black Diamond, Metolius, quickdraw, draw, clip stick, quickdraw, cam, gear