ECOFLOW WAVE3 WAVE2 Duct Mounting Parts (No Mesh)
This is a mounting part for the dedicated duct to attach the ECOFLOW WAVE3/WAVE2 to your car window. It is designed to fit the genuine duct. Since it is a press-fit type, you don't have to worry about breaking the claws of the genuine duct. Also, it has an exquisite taper, so it will hold firmly if pushed in deeply, and lightly if pushed in shallowly.
This is the mesh-free version of our popular ECOFLOW WAVE3 WAVE2 EcoFlow Dedicated Duct Mounting Part. It can also be used simultaneously with the EcoFlow WAVE Duct Insect Net, allowing you to add a mesh section separately.
This is an original design product made using a 3D printer. It was created for personal use of my WAVE3 in my car. We have reviewed and improved the intake/exhaust errors, strength, and accuracy multiple times to reach completion.
The design features more fins to eliminate a sparse appearance. It can prevent light rain. (However, this is not recommended, so please use at your own risk.) By separating the fins to the left and right, we have made it difficult for exhaust air to be re-inhaled.
The WAVE3 seems to be more prone to intake/exhaust errors due to its improved performance. It is designed to prevent errors even during long drives in maximum mode.
It is made of high-quality ABS resin with a heat resistance of 87℃, so you can use it with confidence even in a car during midsummer. *Some sellers use materials like PLA or PETG, which are highly likely to deform if left in a car.
Using a high-end 3D printer, this product is designed without the support structures used during printing, resulting in a relatively clean print surface.
However, due to the nature of 3D printing, there may be layer lines or slight scratches. Please judge from the photos. For this reason, it is listed as slightly scratched or dirty. This sale is for the mounting part only.
*Included screw size: M4 x 20mm
Material thickness: Approximately 2mm thick at the joint. 3mm thick at the duct connection.
Screw hole diameter: M4 (4mm)
Material: ABS
#EcoFlow
#ECOFLOW
#WAVE2
#WAVE3
#Duct
#AirConditioner
#InCar
#DIY
#WAVE
This is the mesh-free version of our popular ECOFLOW WAVE3 WAVE2 EcoFlow Dedicated Duct Mounting Part. It can also be used simultaneously with the EcoFlow WAVE Duct Insect Net, allowing you to add a mesh section separately.
This is an original design product made using a 3D printer. It was created for personal use of my WAVE3 in my car. We have reviewed and improved the intake/exhaust errors, strength, and accuracy multiple times to reach completion.
The design features more fins to eliminate a sparse appearance. It can prevent light rain. (However, this is not recommended, so please use at your own risk.) By separating the fins to the left and right, we have made it difficult for exhaust air to be re-inhaled.
The WAVE3 seems to be more prone to intake/exhaust errors due to its improved performance. It is designed to prevent errors even during long drives in maximum mode.
It is made of high-quality ABS resin with a heat resistance of 87℃, so you can use it with confidence even in a car during midsummer. *Some sellers use materials like PLA or PETG, which are highly likely to deform if left in a car.
Using a high-end 3D printer, this product is designed without the support structures used during printing, resulting in a relatively clean print surface.
However, due to the nature of 3D printing, there may be layer lines or slight scratches. Please judge from the photos. For this reason, it is listed as slightly scratched or dirty. This sale is for the mounting part only.
*Included screw size: M4 x 20mm
Material thickness: Approximately 2mm thick at the joint. 3mm thick at the duct connection.
Screw hole diameter: M4 (4mm)
Material: ABS
#EcoFlow
#ECOFLOW
#WAVE2
#WAVE3
#Duct
#AirConditioner
#InCar
#DIY
#WAVE
Category
Air Conditioner
Brand
ECOFLOW
Condition
Some scratches/marks
Shipping
Included in price (by seller)
From
Kumamoto
Customers Also Viewed
Was this page helpful?
marty.unleash.wiring disabled
