ECOFLOW WAVE3 WAVE2 EcoFlow Duct Mounting Parts
This is a mounting part for the dedicated duct to attach the ECOFLOW WAVE3/WAVE2 to your car window. It is designed to fit the genuine duct. Since it is a press-fit type, you don't have to worry about breaking the claws of the genuine duct. Also, it has an exquisite taper, so it will stay firmly when pushed in deeply, and lightly when pushed in shallowly.
This is an original design product using a 3D printer. I created it for my own use of WAVE3 inside my car. It was completed after repeatedly reviewing exhaust/intake errors, strength, and accuracy.
The design has more fins to eliminate a sparse feeling. It was able to prevent light rain. (However, we do not recommend this, so please use it at your own risk.) By separating the fins to the left and right, it is designed to prevent re-intake of exhaust air.
It seems that the WAVE3 is more prone to exhaust/intake errors due to its improved performance. It is designed to prevent errors even during long-term operation in maximum mode. (This is based on our own confirmation. It does not guarantee that errors will not occur.)
In terms of strength, by integrating the insect and dust-proof mesh with the wind direction fins, it is designed to be resistant to tearing and breaking. It also uses high-quality ABS resin with a heat resistance of 87℃, so you can use it with confidence even in a car during midsummer. *Some sellers may use materials like PLA or PETG, which can deform with high probability if left in a car.
Using a high-end 3D printer, this product is designed without the need for support structures during printing, resulting in relatively clean print surfaces.
However, due to the nature of 3D printers, there may be some layer lines or minor scratches. Please judge from the photos. For this reason, it is listed as slightly scratched or dirty. This sale is for the mounting parts only.
*Included screw size: M4 x 20mm
Material thickness: Approximately 2mm thick at the joint surface. 3mm thick at the duct connection.
Screw hole diameter: M4 (4mm)
Material: ABS
#EcoFlow
#ECOFLOW
#WAVE2
#WAVE3
#Duct
#AirConditioner
#InCar
#DIY
#WAVE
This is an original design product using a 3D printer. I created it for my own use of WAVE3 inside my car. It was completed after repeatedly reviewing exhaust/intake errors, strength, and accuracy.
The design has more fins to eliminate a sparse feeling. It was able to prevent light rain. (However, we do not recommend this, so please use it at your own risk.) By separating the fins to the left and right, it is designed to prevent re-intake of exhaust air.
It seems that the WAVE3 is more prone to exhaust/intake errors due to its improved performance. It is designed to prevent errors even during long-term operation in maximum mode. (This is based on our own confirmation. It does not guarantee that errors will not occur.)
In terms of strength, by integrating the insect and dust-proof mesh with the wind direction fins, it is designed to be resistant to tearing and breaking. It also uses high-quality ABS resin with a heat resistance of 87℃, so you can use it with confidence even in a car during midsummer. *Some sellers may use materials like PLA or PETG, which can deform with high probability if left in a car.
Using a high-end 3D printer, this product is designed without the need for support structures during printing, resulting in relatively clean print surfaces.
However, due to the nature of 3D printers, there may be some layer lines or minor scratches. Please judge from the photos. For this reason, it is listed as slightly scratched or dirty. This sale is for the mounting parts only.
*Included screw size: M4 x 20mm
Material thickness: Approximately 2mm thick at the joint surface. 3mm thick at the duct connection.
Screw hole diameter: M4 (4mm)
Material: ABS
#EcoFlow
#ECOFLOW
#WAVE2
#WAVE3
#Duct
#AirConditioner
#InCar
#DIY
#WAVE
Category
Air Conditioner
Brand
ECOFLOW
Condition
Some scratches/marks
Shipping
Included in price (by seller)
From
Kumamoto
Customers Also Viewed
Was this page helpful?
marty.unleash.wiring disabled
