Horse Riding Boots WINNER HORSE RIDING BOOTS

Vintage WINNER HORSE RIDING BOOTS

Purchased at a saddlery in Spain when I started horseback riding.
The material is rubber (lined with fabric). I previously wore jogging shoes, and after switching to these, they fit my feet perfectly and were very comfortable to ride in. Purchased around 2010.
After using them 4-5 times, I obtained leather boots and haven't used these since.
They show little signs of wear. The material still seems usable.

Size
EU 40 (marked on sole)
UK 6 1/2 (marked on sole)
Inch 10 (marked on sole)
Approx. 24.5 cm

Internal Boot Height
From the bottom where the foot rests to the outer top edge: Approx. 415 mm
From the bottom where the foot rests to the inner top edge: Approx. 390 mm
From the bottom where the foot rests to the front top edge: Approx. 400 mm
From the bottom where the foot rests to the back top edge: Approx. 410 mm

External Boot Height
From the ground to the outer top edge: Approx. 445 mm
From the ground to the inner top edge: Approx. 417 mm
From the ground to the front top edge: Approx. 425 mm
From the ground to the back top edge: Approx. 435 mm

Sole
Sole length (outer): Approx. 270 mm
Sole width (outer): Approx. 91 mm
Heel height (outer): Approx. 35 mm from the ground
Heel width (outer): Approx. 65 mm
Heel length (outer): Approx. 77 mm

Weight: Approx. 777 g (right boot), Approx. 771 g (left boot)

Fit
My maximum calf circumference is approx. 340mm. With jeans on, they fit snugly around my calf (without hindering riding movements). The maximum circumference of the boot's calf area is actually about 365-370mm. While the numbers might suggest a tight fit, the material stretches, so there's no feeling of pressure.
My ankle circumference is 190mm. There is plenty of room around the ankle, with no tightness.
These are comfortable boots to ride in.

Material: Rubber (exact material unknown)
Made in Israel
Brand: WINNER

Color: Black (Dark Gray) - Please refer to photos
No box

Will be shipped via RakuRaku Mercari Bin.