Galaxy Z Flip5 5G Film - Back Panel
Galaxy Z Flip 5 Film
●Recommended for those who don't use a case●
This clear, glossy, soft film adheres to the back and also protects the sub-screen.
Use the included squeegee for a beautiful finish.
TPU Material Film DIAMOND MAX Series
The DIAMOND MAX series represents the highest quality in soft films.
It's thin, durable, and elastic, absorbing impact.
Looking for other types? → #きりGalaxyZFlip5
Compatible Models: Galaxy Z Flip 5 (SC-54D / SCG23)
Included Accessories: Wet sheet, dry sheet, dust removal sticker, application squeegee, installation QR video
★Immediate purchase without comment is welcome. No response after purchase is also fine.
★Standard mail currently does not deliver on Saturdays, Sundays, or holidays. If you are in a hurry or prefer anonymity, we can switch to Mercari delivery for an additional 100 yen. Please contact us before purchasing.
■【Application Tips】■
The film structure from top to bottom is:
- Protective release liner
- Main film
- Adhesive side protective sheets ②③
- Backing sheet ① protecting the surface to be temporarily applied
♪Around the camera and sub-screen (top/bottom)
1. Peel off backing sheet ①. *The film has multiple layers, so peel off all 3 layers together.
(Don't worry about fingerprints)
2. Cut out the camera lens area.
3. Temporarily position the film over the lens. *You can redo this step multiple times.
4. Now for the real application. Fold the right half at a right angle.
5. Starting from the center of the film, peel off the protective sheet while using the squeegee to apply towards the right.
6. Lift the remaining left half and apply towards the left with the squeegee in the same way.
7. Finally, peel off the surface protective sheet. *Be careful not to forget this step.
♪Flip section (SIDE FILM)
1. Same as step 1 above.
2. Position and temporarily apply.
3. Same as step 4 above, but use your finger instead of the squeegee.
♪Lower back
Basically the same as above, but for the main application, you will fold and apply in two sections (top and bottom).
To make it easier to peel, pinch parts ② and ③.
※Do not lift and reapply the film while trying to remove air bubbles during the main application.
This will definitely result in air bubbles. Small air bubbles will disappear within a few days.
●Recommended for those who don't use a case●
This clear, glossy, soft film adheres to the back and also protects the sub-screen.
Use the included squeegee for a beautiful finish.
TPU Material Film DIAMOND MAX Series
The DIAMOND MAX series represents the highest quality in soft films.
It's thin, durable, and elastic, absorbing impact.
Looking for other types? → #きりGalaxyZFlip5
Compatible Models: Galaxy Z Flip 5 (SC-54D / SCG23)
Included Accessories: Wet sheet, dry sheet, dust removal sticker, application squeegee, installation QR video
★Immediate purchase without comment is welcome. No response after purchase is also fine.
★Standard mail currently does not deliver on Saturdays, Sundays, or holidays. If you are in a hurry or prefer anonymity, we can switch to Mercari delivery for an additional 100 yen. Please contact us before purchasing.
■【Application Tips】■
The film structure from top to bottom is:
- Protective release liner
- Main film
- Adhesive side protective sheets ②③
- Backing sheet ① protecting the surface to be temporarily applied
♪Around the camera and sub-screen (top/bottom)
1. Peel off backing sheet ①. *The film has multiple layers, so peel off all 3 layers together.
(Don't worry about fingerprints)
2. Cut out the camera lens area.
3. Temporarily position the film over the lens. *You can redo this step multiple times.
4. Now for the real application. Fold the right half at a right angle.
5. Starting from the center of the film, peel off the protective sheet while using the squeegee to apply towards the right.
6. Lift the remaining left half and apply towards the left with the squeegee in the same way.
7. Finally, peel off the surface protective sheet. *Be careful not to forget this step.
♪Flip section (SIDE FILM)
1. Same as step 1 above.
2. Position and temporarily apply.
3. Same as step 4 above, but use your finger instead of the squeegee.
♪Lower back
Basically the same as above, but for the main application, you will fold and apply in two sections (top and bottom).
To make it easier to peel, pinch parts ② and ③.
※Do not lift and reapply the film while trying to remove air bubbles during the main application.
This will definitely result in air bubbles. Small air bubbles will disappear within a few days.
Category
Android Accessories
Condition
New/unused
Shipping
Included in price (by seller)
From
Kanagawa
Customers Also Viewed
Was this page helpful?
marty.unleash.wiring disabled
