Ryusei Community JB Weld QuickWeld

Thank you for viewing.

This is a quick-drying epoxy adhesive containing iron powder.
It is a fast-curing adhesive that begins to harden in 20 minutes and fully cures in 4 hours.

● Sets in 6 minutes (at room temperature)
● Fully cures in 4-6 hours (at room temperature)

Can bond hard materials (all types of metals such as iron and aluminum, glass, 100% plastics (recycled plastics may not be usable), FRP, concrete, stone, wood, etc.)
*Not usable on PP (polypropylene), and may not be usable on recycled plastics.
Curing begins simply by mixing equal amounts from the two tubes, allowing for long-term storage.

[Features]
◆ Does not harden until mixed.
◆ After full curing, it can be drilled, tapped, machined, polished, and painted.
◆ This adhesive is water-resistant, oil-resistant, and acid-resistant, and is strong against petroleum and chemicals.

[How to Use]
(1) Squeeze out equal amounts of the two components and mix thoroughly with a spatula or similar tool until uniform.
(2) Apply to both surfaces to be bonded and join them together.
(If necessary, degrease and sand the bonding surfaces.)
(3) Apply pressure with tape or other means until the practical setting time (6 hours) has passed.

Precautions
?If it adheres to skin before curing, wipe it off immediately and then wash thoroughly with soap.
?Keep out of reach of children and be careful to prevent them from playing with it.
?Store in a cool place, avoiding direct sunlight and humidity.
?Do not use on humans or living organisms.

#Ryusei #RyuseiCommunity #QuickWeld #Adhesive #Epoxy #Strong #WaterResistant #AcidResistant #OilResistant #FastDrying