Aquarium Cooler TECO TK-500 with Built-in Heater

The period of use is unknown, but this is a relatively new TK500 from before the ZTK era.
Although not supported in Japan, this is the same model as the current ZTK-500, as it was a WiFi model when released.

I have confirmed operation and cleaned the unit before listing.
I circulated water from a 20L bucket and performed internal cleaning with citric acid and confirmed operation.

I set it to 8 degrees, and the water temperature dropped perfectly to the set temperature. There was a lot of condensation, so I checked for about 2 days and then stopped it, but there are no cooling issues.

I removed the exterior and cleaned the interior to clean the details, so there are no blockages in the cooling fins.

I will include images from the disassembly.

For this listing, I have turned off the heater function to reset it to initial settings.
If the heater turns on without water, it can cause damage, so I have turned off the heater function in the settings.
When using, please be sure to turn on the heater function after circulating water.

I will include a printed copy of the online manual.

Hose joints and packing are included, so you can use it immediately.

The parts for clamping the hose and a wrench-like tool are missing, but I don't think they are necessary.

The wrench for securing the top cover can be locked with a regular flathead screwdriver or a coin.

I do not feel the necessity of hose clamp parts.