Hot Water Boiler Taro SCH-901 (with instruction manual)

?Complete water heater set (controller, stand, and outlet unit)
?IC temperature control with a wide temperature range setting from 30℃ to 45℃
?Purchased at full price and used a few times, but selling due to moving and no longer needing it. No issues with operation.
?Please refrain from returns after purchase.

[Product Description]
(1) It is possible to heat water from cold, but it takes time, so please be aware of this. Please also note that this varies depending on the region and environment. (Approximately 3 hours in summer, approximately 8 hours in winter are estimates.)

(2) Please be aware that the following bath additives cannot be used. Please refrain from using sulfur, Yunohana (hot spring crystals), salt-based, strongly alkaline, or strongly acidic bath additives, as well as bath additives that leave powder or clumps in the drain. The metal used for the Kashi Taro is stainless steel (SUS316). For details, please contact the bath additive manufacturer.

(3) We recommend using plain water only. After using bath additives, please be sure to perform the maintenance described in the instruction manual.

(4) If there is a possibility of malfunction, please check the instruction manual. If the problem is not resolved, it will be inspected by the manufacturer, so please understand.

(5) Please avoid bathing simultaneously while the Kashi Taro unit is submerged.

(6) An earth wire is included, so please be sure to connect it to the earth terminal.

(7) The control box is not waterproof. Please install it in a location where it will not be exposed to moisture or water (outside the bathroom). Also, avoid places with rapid temperature changes. The control box will generate some heat during use, but this is not an abnormality. Do not cover it with bags or towels; install it in a well-ventilated area.

(8) The power cord is short, and for customers who plan to use an extension cord, please use an extension cord rated 15A or higher exclusively for this product. Also, absolutely do not use it with a multi-outlet power strip.

(9) The control box can cause malfunctions if submerged, so please be careful not to immerse it in hot or cold water.

(10) The metal part covering the heater (safety cover) does not get hot.