Slumping Mold Set of 2, Glass Fusing

slimpin'×slumpin' Original
This is a square-shaped, deep bowl mold for glass fusing, made using a slump mold technique.
It allows you to create slightly deep glass bowls.
Because the mold is made of porcelain, its surface is smooth and free of irregularities, resulting in a beautiful finish on the glass after firing.
Please apply a release agent, such as Perfect Primer, before use.
■Mold Size■
Approximately 125 x 125 mm
Height: Approximately 50 mm
Material: Porcelain
*Please apply release agent evenly before use. (Due to the material, water-diluted release agents tend to drip. Please use a thicker dilution or a spray-type release agent.)
*After firing, please thoroughly remove any release agent from the mold.
*Please be mindful of the internal dimensions of your kiln and the distance to the heat source. Overly close proximity to the heat source may cause damage.
*Sudden temperature changes can cause damage, so please raise and lower temperatures slowly.