Set of 2! High-low blade HSS metal saw blade for cutting steel and metal. Used item.

Thank you very much for viewing this listing! m(._.)m

◆ This is an HSS metal saw purchased for cutting general steel, iron, and stainless steel materials.
◆ Originally purchased for around ￥20,000 each with an outer diameter of 250mm, it has been used with resharpening and currently has an outer diameter of approximately 170mm.
◆ All blades have been resharpened (toothed) and stored, so they are ready for immediate use upon purchase!
◆ As shown in the product images, there are minor scratches, dirt, and signs of use, but no noticeable damage or rust.
Please check the product images for confirmation! (‐人‐)
◆ They have been resharpened to a high-low tooth profile and stored with rust-preventative oil, so they should still be usable for a while.

■ Product Specifications ■
　※ Blade type: High-low tooth
　※ Outer diameter: Approx. 170mm and 168mm (originally 250mm when new)
　※ Width: 2.0mm
　※ Bore diameter: 32mm
　※ Number of teeth: 120
　※ Pin hole pitch (P): 45-50mm
　※ Flange diameter (F): Φ85
　※ Manufacturer: TSUNE SEIKI CO.LTD.
　　　　　　 TSUNE HSS CIRCULAR SAW
　Used Metal Saw x 2 Piece Set!

▼ Please note that the outer diameter measurements are approximate and taken with a tape measure by an amateur, so please allow for some error! _(._.)_

◆★★★ Important Notes ★★★◆
■ Please refrain from bidding if you have poor manners, are lax, or cannot communicate via messages!