★Comfortable Small Leather Craft Tool★ 1 Hammer [8.0cm] + Acrylic Board ? For Stamping ? For Die Cutting

The product is a set including the acrylic plate and one punching tool, as shown in the second image. Upon arrival, please attach the included adhesive tape to the acrylic plate and the base to use.
If the adhesive tape does not secure properly, please be sure to read the usage precautions below before use.

??Product Description??

?? Punching Tool (1 finished item)
Base: 4 cm x 4 cm
Height: Approx. 8.0 cm
*May be 2-3 mm shorter.
Circle diameter: 8 mm

?? 5mm thick acrylic plate (as shown in the image)
Size: 5.8 cm x 7.5 cm, 5 mm thick
*The acrylic plate is transparent.
This type does not have a protective film, so there may be minor scratches that do not affect use.
?? Bonus adhesive tape
*Approx. 8 cm long

??Features??
A convenient tool for punches, stamps, and other crafting.

When used in leathercraft, it can be pressed onto leather with a hand press machine for stamping or punching.
If using with a drill chuck, the long diameter of the circle is 8 mm, so please use a 13 mm chuck.

★Usage Precautions (Images 14 & 15)
The smooth molded plate surface of the base is a metal cushion sticker applied to the punching tool to prevent scratches on the surface of the punching tool (the part you press with) purchased by the customer.
If you press a deformed die (③), it will cause scratches.
For flat dies (②), the base is less likely to get scratched, but for larger flat dies, it is easier to use if the base is made larger.

*When using with a press, if you press something larger than the base, or if the die design causes the base to deform, please place the acrylic plate or an iron plate in between (sandwich) to enlarge the base for use.
★If you don't mind scratches on the base, please refer to this for guidance.

#Leathercraft
#PrickingIron
#Stamp
#Punch
#DieCutting
#GenuineLeather