Sawhorse Brackets - Set of 4
These are sawhorse brackets, metal fittings for DIY construction of workbenches and table legs (also known as sawhorses).
Overview and Usage: Simply insert lumber such as 2x4s or 1x4s into the brackets and secure them with screws to easily create sturdy workbench legs.
Features: Two brackets can be used to create one leg (horse).
The image shows four brackets, allowing you to build two legs. By placing a board on top, you can complete one work table. Similar products to the main product example in the image include the following.
How to Use
Prepare Lumber: Prepare four pieces of lumber of the same length to be used as legs.
Insert and Secure: Insert the lumber into the left and right grooves of the bracket and secure it by driving screws through the holes on the sides.
Install Tabletop: By spanning another piece of lumber horizontally between the two completed legs and securing it, the base of the workbench is complete.
Overview and Usage: Simply insert lumber such as 2x4s or 1x4s into the brackets and secure them with screws to easily create sturdy workbench legs.
Features: Two brackets can be used to create one leg (horse).
The image shows four brackets, allowing you to build two legs. By placing a board on top, you can complete one work table. Similar products to the main product example in the image include the following.
How to Use
Prepare Lumber: Prepare four pieces of lumber of the same length to be used as legs.
Insert and Secure: Insert the lumber into the left and right grooves of the bracket and secure it by driving screws through the holes on the sides.
Install Tabletop: By spanning another piece of lumber horizontally between the two completed legs and securing it, the base of the workbench is complete.
Category
Table Accessories & Parts
Condition
Some scratches/marks
Shipping
Included in price (by seller)
From
Hyogo
Customers Also Viewed
Was this page helpful?
marty.unleash.wiring disabled
