Encoder, 1 pc, E60H20-8192-3-V-5-C

E60H20-8192-3-V-5-C
Manufactured by AUTONICS
Quantity: 1
Used item
2 units in stock.
Please comment if you wish to purchase multiple units.

Type: Incremental, Resolution: 8192
Outer Diameter (mm): 60, Output Phase: A, B, Z Phase
Control Output: Voltage Output, Power Supply Voltage (VDC): 5VDC ±5%
Wiring Specification (m): Lead wire connector type, Shaft Type: Hollow Shaft
Response Time: ≤1μs, Maximum Response Frequency: 300kHz
Current Consumption: ≤80mA (no load), Insulation Impedance: ≥100MΩ (between all terminals and case, 500VDC mega standard)
Withstand Voltage: 750VAC for 1 minute at 50/60Hz (between all terminals and case)
Connection Method: Lead wire type
Shaft Load: Radial: 5kgf / Thrust: 2.5kgf, Maximum Allowable Rotational Speed: 6000rpm
Vibration Resistance: 10-55Hz (1 minute cycle), Double Amplitude: 1.5mm, 2 hours each in X, Y, Z directions
Shock Resistance: ≤100G
Environmental Temperature: -10 to 70℃ (non-freezing), Storage: -25 to 85℃
Environmental Humidity: 35 to 85%RH, Storage: 35 to 90%RH
Protection Rating: IP50 (IEC standard)
Wiring: φ5mm, 5P, Length: 2m, Shielded cable
Accessories: Bracket
Shaft Inner Diameter (mm): φ20