MC02 Security Alarm & Remote Control Set - White

Can be used for crime prevention during disaster evacuation and for child safety. Unopened, new. This is a magnetic alarm that sounds when the main unit and magnet are separated.

Easily install with double-sided tape by attaching the main unit and magnet to the door or window frame.
Turn ON/OFF and change modes with the included remote control.

● Installation Steps
1. Slide open the top cover of the alarm unit.
2. Insert 2 AA batteries.
3. Pair with the remote control.
- Press and hold the pairing button on the alarm unit for 3 seconds or more until the indicator lamp lights up.
- Press any button on the remote control while the indicator lamp is lit to complete pairing.
4. Close the cover of the alarm unit.
5. Install the alarm unit and magnet using double-sided tape.

- Size & Weight -
- Main Unit: Approx. 9cm (H) x 4.3cm (W) x 1.3cm (D), Weight approx. 52g (including batteries)
- Magnet: Approx. 4.3cm (H) x 1.3cm (W) x 1.3cm (D), Weight approx. 11g
- Remote Control: Approx. 6cm (H) x 3.3cm (W) x 1.1cm (D), Weight approx. 17g

- Batteries Used -
- Alarm Unit: 2 x AA alkaline batteries (sold separately)
- Remote Control: 1 x CR2032 battery

- Specifications -
- Volume: Max. approx. 130dB
- Magnetic detection range: Approx. 1cm
- Remote control detection range: Max. approx. 15m (when there are no obstacles such as walls)

- Mode Description -
After pairing with the remote control is complete, press each button to sound and switch modes.
* Mode switching using the function button should be performed after pressing the release button.
● Alarm Button (Beep sound)
When the main unit and magnet are separated, the alarm will sound for approximately 30 seconds.
● SOS Button
Pressing the SOS button will sound the alarm for approximately 30 seconds.
● Release Button
Pressing the release button turns OFF the alarm.
● Function Button
- Forgetting to close prevention: When the function button is pressed and a beep beep beep beep sound is heard.
Beep beep sound while the main unit and magnet are separated. The sound stops when the main unit and magnet are brought close together.
- Chime: When the function button is pressed and a ding-dong sound is heard, a chime will sound when the main unit and magnet are separated.
- Alarm: When the function button is pressed and a beep beep sound is heard, the alarm will sound when the main unit and magnet are separated, and stop when they are brought close together.