PIAA Oil Filter Z8-M + Cup-Type Wrench for Oil Filter

Cup-type wrench used for installing and removing PIAA automotive oil filters.
Part Number: W65 (Quantity: 1 pc.)
Compatible Size: 65φ

PIAA Twin Power + Magnet Oil Filter Z8-M
■ Revolutionary 2-layer filter paper + magnet ring adopted to improve engine efficiency.
■ Reduces the burden on the filter paper, achieving superior high filtration efficiency and low pressure loss.

■ 2-layer filter paper
? Achieves optimal filter paper distribution corresponding to oil flow rate.
? Filtration performance is pursued to the limit through a two-stage structure combining high-performance type (10 micron) filter paper and standard type (20 micron) filter paper.
■ Large diameter entrance hole
? Enlarged the shape of the oil entrance hole.
? Increases opening ratio, reduces pressure loss, and ensures oil flow rate.
■ Magnet ring plate
? Strongly adsorbs iron powder flowing into the oil with a powerful 100 millistella (1000 gauss) magnet.
? Reduces the burden on the 2-layer filter paper by pre-adsorbing iron powder on the outside of the inner tube.
■ Part Number: Z8-M
■ Product Height: 85mm
■ Outer Diameter: 65
■ Thread Diameter: M20 × 1.5
■ Weight: 290g
■ Wrench No. (PIAA Part Number): W65
■ For domestic gasoline vehicles only.

I am selling these because they were not compatible. Both are unused.