Incubator, Cage

# Incubator, Cage
Door opening: Approx. 270 x 270 mm
External dimensions: Approx. 310 x 330 x H420 mm
100V specification, Heater 150W.
Temperature accuracy: ±2℃
Device to maintain a constant temperature
Material: 5mm thick vinyl chloride board
Frame: Iron square pipe
Temperature setting range: Room temperature up to approx. 42℃
Please set the temperature up to around 42℃ due to material limitations.

Can be used as a cage for small animals sensitive to cold, reptiles, etc., or as an incubator.
It is very convenient as you can raise chicks inside the container until their feathers grow in after hatching.
Please perform egg turning manually. Humidity can be maintained at around 60% by simply placing a container of water inside.
As this is a handmade item, please understand that there may be minor scratches or dirt.
Furthermore, we are not responsible for any accidents, so please purchase at your own risk.
We also offer after-sales service. We will repair free of charge for parts failure, excluding shipping costs, so please purchase with confidence.

[Regarding future production]
The stock of the most expensive temperature controller component has run out.
From now on, it will need to be purchased separately, making it difficult to offer items in the 10,000 yen range.
The cost of parts for this product, calculated at retail prices, would be around 49,000 yen.
I search for and purchase new or unused items on auction sites and Mercari, but there are limits to the price, and some parts can only be obtained from online stores or home centers.
I am currently making these as a hobby, so I am not charging for processing fees.
If the customer prepares all the parts, I can create it for around 5,000 yen.

Parts List
Temperature controller, Solid relay, Pool box x3, Vinyl chloride board 300x300x5t x4,
Terminal block, AC fan, Heater, Toggle switch, Pilot lamp, Thermocouple, Hinges, Door handle, Door lock hardware, Vinyl chloride pipe, Wiring, Outlet, Iron square pipe, Rubber feet x4, Other parts