Heat Shrink Tube 3-Piece Set - For Shoelace Repair, etc. - Use Your Points
☆Product Description☆
1 x Outer diameter approx. 4.0mm x Length approx. 20cm
1 x Outer diameter approx. 4.5mm x Length approx. 20cm
1 x Outer diameter approx. 5.0mm x Length approx. 20cm
*These are measurements before shrinkage.
*We also have 2-piece, 4-piece, and 5-piece sets available.
*We also have outer diameters of approx. 3.5mm and 6.0mm in stock. If you wish to change the set contents, please contact us in the comments and we will create a new listing for you.
*Cut to your desired length and attach by rolling with an iron. Please be careful as the tube may tear if the iron temperature is too high.
*The finish will be slightly soft, not stiff like the tips of typical shoelaces. If the eyelets are small, please thread the laces carefully to avoid crushing the tube. If the tube becomes bent or crushed, it should straighten out again by applying the iron with a rolling motion.
*The laces will adhere somewhat when heated, but may come off if pulled strongly. We recommend applying glue to the tips to prevent them from coming off.
They adhere well to the cotton flat shoelaces we sell, but may not adhere to all types of shoelaces. Please be aware of this in advance.
*Some items may be bent or crushed, but this does not affect their use.
*We also sell cotton shoelaces, so please take a look.
☆Shipping Method☆
We plan to ship via standard/non-standard mail (no tracking, no compensation for postal accidents).
*We can change to a shipping method with compensation. Please contact us in the comments before purchasing if you wish to do so.
☆Notes☆
*Please allow for minor dirt.
1 x Outer diameter approx. 4.0mm x Length approx. 20cm
1 x Outer diameter approx. 4.5mm x Length approx. 20cm
1 x Outer diameter approx. 5.0mm x Length approx. 20cm
*These are measurements before shrinkage.
*We also have 2-piece, 4-piece, and 5-piece sets available.
*We also have outer diameters of approx. 3.5mm and 6.0mm in stock. If you wish to change the set contents, please contact us in the comments and we will create a new listing for you.
*Cut to your desired length and attach by rolling with an iron. Please be careful as the tube may tear if the iron temperature is too high.
*The finish will be slightly soft, not stiff like the tips of typical shoelaces. If the eyelets are small, please thread the laces carefully to avoid crushing the tube. If the tube becomes bent or crushed, it should straighten out again by applying the iron with a rolling motion.
*The laces will adhere somewhat when heated, but may come off if pulled strongly. We recommend applying glue to the tips to prevent them from coming off.
They adhere well to the cotton flat shoelaces we sell, but may not adhere to all types of shoelaces. Please be aware of this in advance.
*Some items may be bent or crushed, but this does not affect their use.
*We also sell cotton shoelaces, so please take a look.
☆Shipping Method☆
We plan to ship via standard/non-standard mail (no tracking, no compensation for postal accidents).
*We can change to a shipping method with compensation. Please contact us in the comments before purchasing if you wish to do so.
☆Notes☆
*Please allow for minor dirt.
Category
Resin & Plastic
Condition
New/unused
Shipping
Included in price (by seller)
From
Tottori
Customers Also Viewed
Was this page helpful?
marty.unleash.wiring disabled
