Submersible Pump, Amphibious, Max Flow Rate: 2000L/H, Max Head: Approx. 2M, AC100V

Amphibious Pump - For Land Use
[Specifications] Max Flow Rate: 2000 L/H, Max Head: Approx. 2M, Input Voltage: AC100V-120V 50Hz/60Hz, Wattage: 30W, Outlet Outer Diameter: 16mm & 19mm & 25mm & Side Inlet Diameter 25mm * 1 pc, Power Cord Length: 1.55m. If the pump does not rotate in winter, the oil in the permanent magnet driver may have solidified. You can disassemble the pump, remove the driver, and place it in warm water.
[Brand New Amphibious Pump] Not only a general submersible pump, but also perfect as a land-use pump! Open the side of the pump, assemble the outlet, and connect it to a water pipe to use it as a land pump! (Note: When used as a land pump, the pump must always be filled with water. Running it dry will cause damage.)
[Adjustable Flow Rate] There is a flow rate adjustment knob on the side of the pump. The maximum water output is 2000 L/H, and the head can be adjusted up to 2M. You can change the head by adjusting the flow rate. (Head refers to the height the water pipe can lift water, which is different from the direct height of the fountain pump.)
[4 Nozzles & Handle Included] Equipped with 4 nozzles (16mm & 19mm & 25mm outlet nozzles & 25mm inlet nozzle) for creating different water flow effects. A handle is also included for easy carrying. It also comes with 4 suction cups and an English/Japanese instruction manual.