Tank approx. 130L with faucet, rainwater, resin, water storage, garden, killifish, reuse
This is a resin tank, a reused item from a food factory. It is the type shown in photos 1 and 2. The color is dark, with some writing on it. It comes with the faucet shown in photo 3 (a new adjustable faucet).
The dimensions of the tank body (excluding the lid) are:
Height approximately 69 cm (height to the bottom of the threads approximately 64 cm), inner diameter of the opening approximately 34 cm, circumference approximately 164 cm (body diameter calculated from circumference approximately 52 cm), and weight including the lid approximately 6 kg. The tank has a size marking 3. (Capacity is approximately 130L based on a simple measurement; capacity is not guaranteed).
The faucet will be installed with a hole drilled approximately 7 cm from the bottom. The faucet inlet inside the tank will be 4-5 cm from the bottom.
*Please note that these are amateur measurements, so there may be an error of about 1 cm.
*If requested, we will drill holes free of charge. (Hole sizes are limited to 20, 22, 28, 30, 42, 53, 55 mm in diameter. Other sizes cannot be accommodated due to tool limitations.) If you wish to have holes drilled, please inform us of the hole size and location promptly after bidding.
*If you have a preferred location for the faucet, please inform us of the specific location promptly after bidding. Some locations may not be suitable for installation due to the tank's shape.
The lid has a double structure with an inner plastic lid and a screw-on lid (please consider the inner lid as a bonus).
Since it was used for transporting food ingredients in a food factory, it can be safely used for fields and other purposes with a simple wash.
As this is a reused item, there may be scratches, writing, dents, sticker residue, dirt, cracks or chips on the lid's rim, fading, and odors.
All use is at your own risk.
*The photos are of tanks of a similar model and may be used as a reference. The color and shape may vary slightly depending on the size.
Thank you for your consideration.
The dimensions of the tank body (excluding the lid) are:
Height approximately 69 cm (height to the bottom of the threads approximately 64 cm), inner diameter of the opening approximately 34 cm, circumference approximately 164 cm (body diameter calculated from circumference approximately 52 cm), and weight including the lid approximately 6 kg. The tank has a size marking 3. (Capacity is approximately 130L based on a simple measurement; capacity is not guaranteed).
The faucet will be installed with a hole drilled approximately 7 cm from the bottom. The faucet inlet inside the tank will be 4-5 cm from the bottom.
*Please note that these are amateur measurements, so there may be an error of about 1 cm.
*If requested, we will drill holes free of charge. (Hole sizes are limited to 20, 22, 28, 30, 42, 53, 55 mm in diameter. Other sizes cannot be accommodated due to tool limitations.) If you wish to have holes drilled, please inform us of the hole size and location promptly after bidding.
*If you have a preferred location for the faucet, please inform us of the specific location promptly after bidding. Some locations may not be suitable for installation due to the tank's shape.
The lid has a double structure with an inner plastic lid and a screw-on lid (please consider the inner lid as a bonus).
Since it was used for transporting food ingredients in a food factory, it can be safely used for fields and other purposes with a simple wash.
As this is a reused item, there may be scratches, writing, dents, sticker residue, dirt, cracks or chips on the lid's rim, fading, and odors.
All use is at your own risk.
*The photos are of tanks of a similar model and may be used as a reference. The color and shape may vary slightly depending on the size.
Thank you for your consideration.
Category
Watering, Faucets & Water Fixtures
Condition
Scratches/marks
Shipping
Included in price (by seller)
From
Aichi
Customers Also Viewed
Was this page helpful?
marty.unleash.wiring disabled
