④ Flat Wood Knob, Wood/Gold, 1 pc. Daiwa S Type, Shimano A Type
◆ Compatible with Daiwa baitcasting reels such as Steez, Zillion, Tatula, Ryoga, Millionaire, Exist, Airity, Certate, Luvias, Caldia, etc., and Shimano baitcasting reels such as Aldebaran, Scorpion, Exsence, Calcutta Conquest, Antares, SLX, Stella, Vanquish, Twin Power, Complex, Vanford, Stradic, Exsence, Ultegra, etc. For spinning reels, it is compatible with general 1000 to 4000 class reels (※The standard is that the knob shaft is 4mm thick).
◆ You will receive the wood grain item shown in this image. This is an actual image.
◆ Due to being manufactured overseas, there may be some roughness in the finish.
◆ The color may differ slightly from the actual product due to the way the photo is taken. Please understand.
◆ The reel installation image is for size confirmation purposes only. The pattern of the knob is different from the one being sold. Also, the reel is not included.
◆ Washers, bearings, and collars are included. Most models can be installed with the included parts. If you need more, please prepare them separately. We do not accept returns or exchanges if you cannot install the product due to insufficient parts.
◆ As this is a personal inspection, there may be oversights.
◆ Immediate purchase is OK, but please check your profile to avoid trouble. Thank you.
※ About Bearings
◆ We have received several comments that the bearing is too tight to insert into the knob body. It may not go in if you try to insert it with your fingers or tweezers.
● Knob Cap Side
① Temporarily assemble. ② Insert one washer between the screw and the bearing. ③ While being careful not to insert the bearing diagonally into the hole, tighten the screw little by little. ④ The screw will gradually enter the knob body by pressing the bearing.
● Handle Base Side
① Place a flat, hard object against the bearing and insert it little by little while tapping, making sure it is not inserted diagonally.
※ As this is a personal listing, we ship with simple packaging.
Please only purchase if you understand and agree to the above points.
◆ You will receive the wood grain item shown in this image. This is an actual image.
◆ Due to being manufactured overseas, there may be some roughness in the finish.
◆ The color may differ slightly from the actual product due to the way the photo is taken. Please understand.
◆ The reel installation image is for size confirmation purposes only. The pattern of the knob is different from the one being sold. Also, the reel is not included.
◆ Washers, bearings, and collars are included. Most models can be installed with the included parts. If you need more, please prepare them separately. We do not accept returns or exchanges if you cannot install the product due to insufficient parts.
◆ As this is a personal inspection, there may be oversights.
◆ Immediate purchase is OK, but please check your profile to avoid trouble. Thank you.
※ About Bearings
◆ We have received several comments that the bearing is too tight to insert into the knob body. It may not go in if you try to insert it with your fingers or tweezers.
● Knob Cap Side
① Temporarily assemble. ② Insert one washer between the screw and the bearing. ③ While being careful not to insert the bearing diagonally into the hole, tighten the screw little by little. ④ The screw will gradually enter the knob body by pressing the bearing.
● Handle Base Side
① Place a flat, hard object against the bearing and insert it little by little while tapping, making sure it is not inserted diagonally.
※ As this is a personal listing, we ship with simple packaging.
Please only purchase if you understand and agree to the above points.
Category
Reel
Condition
New/unused
Shipping
Included in price (by seller)
From
Okayama
Customers Also Viewed
Was this page helpful?
marty.unleash.wiring disabled






