LEKATO MW-1 External Wireless Microphone System

● Used only a few times, but works without any issues.
Instruction manual is not included.
The outer box has scratches, but the product itself is clean.

● LEKATO MW-1 Wireless Microphone System with Microphone and USB Cable.
- Model: MW-1
- Brand: LEKATO
- Accessories: Microphone, USB Cable
- Type: Wireless Microphone System

● Please refer to the photos for details on accessories and other information. Thank you for looking. Please only purchase if you understand.

● Other Details
Cell Capacity: 3.7v 400mah
Receiving Sensitivity: -85dbm
Receiving Frequency: 5.8GHz Frequency
Anti-jamming Method: Frequency Hopping
Signal Distortion: <0.02%
Gain: 0 db
SNR: 105db
Frequency Response: 20Hz-20KHz
Latency: <5ms
Sampling Rate: 24bit/48KHz
Output Impedance: 6800
Port Type: XLR Male Port
Transmitter and Receiver Pairing
The default setting for the MW-1 microphone wireless system is channel 1. If you wish to use other channels, please follow these steps:
1. Turn on the receiver and transmitter.
2. Connect the receiver to the microphone and the transmitter to a mixer or other equipment.
3. You can pair the channels of the receiver and transmitter by long-pressing the channel switch button. The status indicator will flash blue when the signal is paired.
4. Once pairing is successfully completed, the status indicators on both the transmitter and receiver will turn solid blue.

You can check the battery level of the receiver and transmitter by turning on the unit and the associated channel indicator.