Freenove ESP32 / ESP32-S3 WROVER WROOM
Compatible Models: Freenove ESP32 / ESP32-S3 Series (Note: Not compatible with other brands' boards due to different pinouts) (Download required, no paper tutorial. English only)
GPIO Status LED: The LED lights up when the GPIO outputs or inputs a high level, and turns off when it outputs or inputs a low level.
Independent LED: The status LED is driven by the chip, not the GPIO, so it does not affect the GPIO.
Power Circuit: Provides multiple 5V and 3.3V power outputs (5V output up to 3A when using external power).
Terminal Blocks and Headers: Connects to all pins of ESP32 / ESP32-S3 with a pitch of 2.54mm (0.1 inch).
GPIO Status LED: The LED lights up when the GPIO outputs or inputs a high level, and turns off when it outputs or inputs a low level.
Independent LED: The status LED is driven by the chip, not the GPIO, so it does not affect the GPIO.
Power Circuit: Provides multiple 5V and 3.3V power outputs (5V output up to 3A when using external power).
Terminal Blocks and Headers: Connects to all pins of ESP32 / ESP32-S3 with a pitch of 2.54mm (0.1 inch).
Category
Distribution Devices, Pa Equipment, Recording Equipment
Condition
New/unused
Shipping
Included in price (by seller)
From
Hokkaido
Customers Also Viewed
Was this page helpful?
marty.unleash.wiring disabled
