Anti-rotation holder for IC-705 handheld antenna, set of 2 (Type-B)

This holder prevents the handheld antenna from rotating when attached to the ICOM IC-705 via an L-shaped BNC connector.
Designed for easy attachment and use of handheld antennas when you want to operate briefly on 144/430MHz during mobile operations.
It suppresses antenna rotation and makes simple operations more comfortable.
*There are Type-A and Type-B depending on the shape of the BNC connector. Please be sure to check About BNC Connectors [Important].

■ Set Contents
Includes two types of holders that can be used according to your scene.

[Upright Type]
Suitable for use when placing the IC-705 on a flat surface such as a desk.
The antenna is designed to stand upright relative to the main unit.

[Angled Type (approx. 18°)]
Suitable for use when tilting the main unit forward with a mini tripod or stand.
The antenna is designed to be angled at approximately 18° relative to the main unit.

*Radio unit, BNC connector, and antenna are not included in the product.

■ About BNC Connectors [Important]
This product is designed for use with BNC connectors that do not have a box on the back.
For connectors with a box, please check Type-A.
*Type-A provides more stable fixation.

This product is designed based on the following dimensions:
- From the base of the radio connector to the rear end of the connector: approx. 25.4mm
- Diameter of the L-shaped connector body: approx. 9.6mm

If the dimensions differ, it may not be attachable.

Reference Connector Used
Misumi 050-1480
(Photo reprinted from Misumi's website)

■ Precautions
- Since the antenna is directly attached to the BNC connector, avoid using heavy antennas or operating in strong winds.
- This product is an accessory part for simple operations. Excessive force or unexpected use may cause damage.
- As it is 3D printed, there may be surface unevenness or small burrs.
- The shape and structure may be revised for improvement.

■ Photo Descriptions
1st image: Image of upright type in use
2nd image: Image of angled type in use
3rd image: Product (2-piece set)
4th & 5th images: Examples of upright type/angled type installation (red prototype used for clarity. Actual product is black)
6th image: BNC connector used (050-1480) *Not included in the product