Tokyo Marui SAA PPC Custom Style Barrel 4.75 inch Beta Version

This is a PPC custom-style barrel that can be attached to the Tokyo Marui SAA. The gun body is not included.
It can be attached by reusing the set screws used to fix the barrel.
There is a slight wobble, so it is considered a beta version, but it will not move unless force is applied left or right. It does not affect actual shooting performance.

The sight part is movable and has screws and springs, allowing for vertical adjustment with a screwdriver.
At the lowest setting, it is adjusted to hit the center at around 5 meters. By loosening the screws, you can adjust it to hit further away.

Although it is 3D printed, it is printed at a 0.1mm pitch and a speed of 60mm/s (low speed), so the layer lines are almost imperceptible.
There may be variations in the product, such as layer lines and unevenness. We appreciate your understanding.

If you are amenable, we can adjust the barrel length, such as for a 6-inch model.
Please make your request in the comments section.

This is a beta version, so it is priced affordably. Only one available.