ScanSnap Silicone Tube for Roller Replacement Repair s1300/s300

Set of 4, for use with a tube cutter
Not genuine parts
These are silicone tubes for replacing the feed rollers and output rollers of ScanSnap S300 / ScanSnap S300M / ScanSnap / ScanSnap S1300 S1300i.
Silicone tube: Inner diameter 5mm, Outer diameter 9mm, Length approx. 24mm (with some variation)

These are for replacing the degraded rubber rollers of your ScanSnap. There are two methods: complete disassembly or partial replacement by making a vertical cut. These tubes can be used as-is for complete disassembly, or by making a cut for partial replacement.

Method for Complete Disassembly Replacement
The process is too lengthy to describe here, so please search online. There is no difference in normal use, and although it takes time, the result will be aesthetically perfect.

Method for Partial Replacement
1. Remove the feed rollers and output rollers by making a vertical cut with a cutter and pulling them off. If hydrolysis has progressed significantly, you may need to remove stickiness with anhydrous ethanol and cotton swabs.
2. Make a vertical cut in the new tube and attach it to the feed roller and output roller shafts, utilizing the rotation of the power button.
Some people use adhesive, but it is not necessary. Only attach adhesive if you wish to do so.

This is sold as surplus from a personal purchase, so the quality differs from products sold by companies. If you are concerned about burrs, please purchase from a company.
If the quantity is insufficient, a refund will be processed.