R*3様 Fender Stratocaster Maple Neck, Made in 1974

Thank you for looking.
I am listing this item because I replaced the neck.
It was manufactured in '74.
Previously, at Matsushita Kobo in Harajuku, the nut was replaced, the frets were replaced (stainless steel jumbo), and the fingerboard radius was processed to 360R. The finish is urethane (the headstock is original). The fingerboard finish has been polished to look relic-like up to the 13th fret, though it may be difficult to see in the photos.
The nut is oil-soaked cow bone, and the nut slot is for 09-42 gauge strings.
I haven't played it much, so I don't think the frets are very worn.
The truss rod has room for adjustment in both directions.
I did not feel any warping or twisting.
There is some flame maple visible.
The neck joint measurements, measured with digital calipers, are approximately 54.8mm on the headstock side and approximately 56.2mm on the body side, compared to the neck pocket.
If you are satisfied with the above and are interested, please consider it.
Thank you.