SCHECTER Guitar Neck PT Flying Tiger
This is a SCHECTER PT Flying Tiger USAF guitar neck.
I acquired it previously and intended to build a component guitar by attaching it to a suitable body due to its distinctive headstock and inlays, but I don't have much time, so I'm putting it up for sale.
The frets are not significantly worn, with about 80-90% remaining overall.
The neck has been adjusted to be straight or slightly forward-bowed (please understand that this may change slightly depending on the temperature and humidity at the destination).
When adjusting the truss rod, I turned it about 15° counter-clockwise (loosening direction). It feels like there's a little more room to loosen, and plenty of room to tighten.
Pegs were not attached when I obtained it, so I've attached a set of black ones I had on hand. Please consider the pegs as a bonus.
Shipping is free nationwide.
I acquired it previously and intended to build a component guitar by attaching it to a suitable body due to its distinctive headstock and inlays, but I don't have much time, so I'm putting it up for sale.
The frets are not significantly worn, with about 80-90% remaining overall.
The neck has been adjusted to be straight or slightly forward-bowed (please understand that this may change slightly depending on the temperature and humidity at the destination).
When adjusting the truss rod, I turned it about 15° counter-clockwise (loosening direction). It feels like there's a little more room to loosen, and plenty of room to tighten.
Pegs were not attached when I obtained it, so I've attached a set of black ones I had on hand. Please consider the pegs as a bonus.
Shipping is free nationwide.
Category
Parts / Accessories For Guitar / Bass
Brand
schecter
Condition
Some scratches/marks
Shipping
Included in price (by seller)
From
Okinawa
Customers Also Viewed
Was this page helpful?
marty.unleash.wiring disabled
