1. Adjustable truss rod for 12th fret & short scale, made by StewMac
This item belonged to my father, whose hobby was making guitars. It was purchased from StewMac.
It appears to have been mounted once and then removed and stored. While there are scratches and dirt overall, there are no critical defects that would affect its use. However, I am not knowledgeable about truss rods, so I cannot provide further evaluation or explanation.
Total length approximately 410mm, width approximately 12mm, wrench specification approximately 5.7mm. It is likely for a neck, such as for a 12-fret joint.
Please also refer to the StewMac website below.
https://www.stewmac.com/luthier-tools-and-supplies/materials/truss-rods/adjustable-truss-rods/u-channel-truss-rod/?queryid=72ddee62cc8d530be84c922548fd84de
Thank you for your understanding that this is a used item before considering your purchase.
It appears to have been mounted once and then removed and stored. While there are scratches and dirt overall, there are no critical defects that would affect its use. However, I am not knowledgeable about truss rods, so I cannot provide further evaluation or explanation.
Total length approximately 410mm, width approximately 12mm, wrench specification approximately 5.7mm. It is likely for a neck, such as for a 12-fret joint.
Please also refer to the StewMac website below.
https://www.stewmac.com/luthier-tools-and-supplies/materials/truss-rods/adjustable-truss-rods/u-channel-truss-rod/?queryid=72ddee62cc8d530be84c922548fd84de
Thank you for your understanding that this is a used item before considering your purchase.
Category
Parts / Accessories For Guitar / Bass
Condition
Scratches/marks
Shipping
Included in price (by seller)
From
Unspecified
Customers Also Viewed
Was this page helpful?
marty.unleash.wiring disabled
